Sole' Premium Nylon/Olefin Solution

How To Use:

Mix: 5 oz Sole' in 1 gallon of water. Use as a pre-spray only.

Application: Apply Sole' through a pump up, electric, or in-line extraction sprayer.

Coverage: Spray all soiled areas with enough Sole' so the are won't dry out in a 30-minute period. The carpet must be wet when extracting. If the carpet dries out prior to extraction, re-spray it and let dwell again. Don't spray more carpet than you can extract prior to Sole' drying out.

Dwell Time: Sole' hold be left on the carpet for a minimum of 10 minutes prior to extraction. It is very important Sole' has enough time to break down and suspend the soil for removal. It is recommended to agitate the carpet after spraying.

Extraction: After 10 minutes extract the pre-sprayed are and been into surrounding areas to eliminate definition lines. Sole' is a powerful restorative cleaning agent that must be rinsed and neutralized, using water extraction, with Neutrex Premium Neutralizing Agent by Bluegreen Magic. Plain water extraction is not enough to stop chemical residues that form after cleaning. Failure to use Neutrex will leave detergent residue in the carpet.

Helpful Hint: Use of a brushing machine with cylindrical brushes, designed for carpet agitation of the pre-spray prior to extraction, is highly suggested. Brushing will improve the cleaning result dramatically.

Troubleshooting: If the carpet shows little response to the above instructions, it is due to one of the following:
(1) Not enough Sole' was applied.
(2) Dwell time was less than 10 minutes.
(3) Sole' dried out before extracting.
(4) The soil is petroleum based and has etched itself into the dye sites. More than likely this contaminant has been on the carpet for a long period of time and the carpets yellowed or browned in the traffic lanes. If this is the case we suggest using Encaps by Bluegreen Magic, a drycleaning carpet solution that works well for removing petroleum soil.

Caution: Do not use undiluted. Mix as directed, more is not better! Wipe up immediately if Sole' gets on any surface other than carpet. Sole' is formulated to use regularly on solution dyed nylon and Olefin fiber. For restorative purposes Sole' may be used on yarn dyed nylon and polyester carpet. Sole is not recommended for use on wool carpet. Regular cleaning of nylon and polyester carpet should be done using 6.6 by Bluegreen Magic. 6.6 is designed to safely remove both organic and petroleum soils from nylon. Always do a colorfastness test in an inconspicuous area before cleaning. Use a white rag dampened with diluted Sole'. Lightly blot the carpet in an inconspicuous area. If the carpet dye transfers to the towel, the carpet is not colorfast and you should discontinue use.

First Aid:

Skin Irritation: If contact occurs wash skin with soap and water.

Eye Contact: Flush thoroughly with water for 15 minutes. If irritation persists, contact a physician immediately.

Ingestion: Drink 1 to 2 glasses of water do dilute. Consult a physician immediately.

Inhalation: Prolonged exposure may produce a headache or mucous membrane irritation to people with greater sensitivity to cleaning agents. Seek fresh air.

KEEP OUT OF REACH OF CHILDREN

• Material: Nylon/Olefin Carpet
• Category: HWE Solution
• pH: 11.5
• Brand: Bluegreen Magic
• Chemical Type: Water-based
• Type: Liquid
• SKU: BGM-SL-4-GAL/BGM-SL-1-GAL